Client_Dlg-ActivateStandaloneLicenseOnlyFormActivate Standalone License_AD

Вы просматриваете версию 17.0. Для самой новой информации, перейдите на страницу Client_Dlg-ActivateStandaloneLicenseOnlyForm((Activate Standalone License))_AD для версии 21
Applies to Altium Designer versions: 15.1, 16.0, 16.1, 17.0 and 17.1

The Activate Standalone License dialog

The Activate Standalone License dialog

Summary

If you are accessing your Standalone license for the very first time, or you have inadvertently deleted the license from your computer (and have no backup of the associated license file), you will need to activate (reactivate) the license. The Activate Standalone License dialog will enable a temporary connection with Altium, allowing you to sign in to your Altium account and activate/reactivate your Standalone License. Once successfully activated/reactivated, closing the dialog will place you back in a disconnected state.

Access

The dialog is accessed by performing the following steps:

  1. Click DXP » My Account then select the License Management tab.  
  2. Click the Add standalone license file link.
  3. Click the Activate license link.
Users must be disconnected from Altium to access this dialog. To disconnect, click Account Preferences on the License Management page. Under the Altium Connection region of the Preferences dialog, select No, I wish to remain disconnected from Altium. Click OK to save these settings and return to the License Management page.

Options/Controls

  • I have read and understand the warning - enable the checkbox to confirm that you have read and understood the warning regarding a connection to Altium and the gathering of information about your PC hardware over the secure Altium portal.
  • Username - enter your username.
  • Password - enter your password.
  • Sign In - click to sign in once all the above information has been entered. The connection to Altium will be made and the Standalone License(s) that are available to you will be presented within the dialog. Select your license and click the Activate License link. Once activated, a confirmation dialog will appear to reflect successful activation. Click OK in the confirmation dialog, then click the Close & Sign Out button at the bottom of the Activate Standalone License dialog.
After closing and signing out of the Activate Standalone License dialog, click the Refresh link in the Available Licenses region of the License Management page to reflect your use of the Standalone License.
See Standalone Licensing for more information.
Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.