WEBVTT

1
00:00:00.266 --> 00:00:04.266 line:80%
RE-ORIENTING AND POSITIONING 
A GENERIC MODEL

2
00:00:05.766 --> 00:00:10.399 line:80%
Each of these 3 mounting pins has 
had a snap point added at its center

3
00:00:10.766 --> 00:00:15.766 line:80%
and each will be mapped to 
1 of these 3 pads on the board

4
00:00:23.700 --> 00:00:25.900 line:80%
After selecting the model

5
00:00:26.800 --> 00:00:30.800 line:80%
the 3 reference, or anchor points are selected

6
00:00:38.466 --> 00:00:43.399 line:80%
Then the 3 corresponding destination points are selected

7
00:00:48.633 --> 00:00:55.633 line:80%
The software can now reorient and position the 
model on the footprint, by aligning these points