システム要件

現在、バージョン 18.0. をご覧頂いています。最新情報については、バージョン システム要件 の 24 をご覧ください。
Applies to Altium Designer versions: 18.0 and 18.1

 

Altiumソフトウェアをインストールする前に、お使いのコンピューター/サーバーが以下のシステム要件を満たしていることを確認してください。

Altium Designer

以下は、Altium Designerをインストールして実行するための、推奨および最小システム要件です。

推奨システム要件

  • Windows 7 (64-bit only), Windows 8 (64-bit only), or Windows 10 (64-bit only)
  • Intel® Core™ i7 processor or equivalent
  • 16GB RAM
  • 10GBのハードディスク空き容量(インストールとユーザーファイル用)
  • SSD
  • GeForce GTX 1060/Radeon RX470などの高性能グラフィックカード(DirectX 10以上をサポート)
  • 2560x1440(またはそれ以上)の画面解像度のデュアルモニター
  • Space Navigatorなどの3D PCB設計用3Dマウス
  • Adobe® Reader®(3D PDF表示のため、バージョンXI以降)
  • インターネット接続
  • 最新のWebブラウザー
  • 32ビット版または64ビット版のMicrosoft Office(BOMでMicrosoft Excelが、DbLibsでMicrosoft Accessが必要)。64ビット版のMicrosoft Accessデータベースエンジン2010(DbLibsで必要 - 64ビット版のMicrosoft Officeには含まれていますが、32ビット版のMicrosoft Officeには含まれていません)。32ビット版および64ビット版のAltium Designer/Altium NEXUSソフトウェアを実行している場合は、「Using Database Libraries with 32-bit and 64-bit Altium Design Software on the same Computer」を参照してください。
Some keyboard shortcuts that are used within the software require a numeric keypad.

最小システム要件

  • Windows 7 (64-bit only), Windows 8 (64-bit only), or Windows 10 (64-bit only)
  • Intel® Core™ i5 processor or equivalent
  • 4GB RAM
  • 10GBのハードディスク空き容量(インストールとユーザーファイル用)
  • GeForce 200 series/Radeon HD 5000 series/Intel HD 4600などのグラフィックカード(DirectX 10以上をサポート)
  • 1680x1050(ワイドスクリーン)または1600x1200(4:3)の画面解像度のモニター
  • Adobe® Reader®(3D PDF表示のため、バージョンXI以降)
  • 最新のWebブラウザー
  • 32ビット版または64ビット版のMicrosoft Office(BOMでMicrosoft Excelが、DbLibsでMicrosoft Accessが必要)。64ビット版のMicrosoft Accessデータベースエンジン2010(DbLibsで必要 - 64ビット版のMicrosoft Officeには含まれていますが、32ビット版のMicrosoft Officeには含まれていません)。32ビット版および64ビット版のAltium Designer/Altium NEXUSソフトウェアを実行している場合は、「Using Database Libraries with 32-bit and 64-bit Altium Design Software on the same Computer」を参照してください。
Some keyboard shortcuts that are used within the software require a numeric keypad.

DPIスケーリングのサポート

下表は、使用されているモニターの垂直解像度に応じてサポートされる最大DPIスケーリングをまとめたものです。

モニターの垂直解像度(ピクセル) サポートされる最大DPIスケーリング
1024~1200 100%
1600 125%
1800 200%
2K以上 250%

その他の注意事項

設計の規模

上記のシステム要件詳細は、中規模サイズ(コンポーネントおよびネットの数がそれぞれ最大1000程度)のPCB設計向けです。コンポーネントおよびネットの数がこれより大きい設計の場合は、プロセッサーファミリーのアップグレードを検討してください(例えば、i5からi7へアップグレード)。

適切なグラフィックカードの重要性

Graphics cards are a critical hardware element that can have a large impact on both the performance and stability of systems. Choose the right hardware requirements necessary to achieve stunning results, make the whole system more responsive and ‘feel’ better, and remove distractions to design caused by lags in the GUI. This version of Altium Designer's PCB editor has been optimized for use with DirectX 10, and requires a graphics card that supports this. Altium has chosen DirectX rather than OpenGL for its graphics engine, which has become the preferred standard for gaming graphics cards. An advantage of this choice is the fact that gaming cards are often significantly less expensive than workstation cards of equivalent performance. We therefore strongly recommend the use of a gaming card instead of a workstation card.

高性能なグラフィックカードの必要性は、3D PCB機能の使用頻度に直接関係します。例えば、3D PCB機能をあまり使用しない場合、HD4000グラフィックが内蔵されたCore i7プロセッサーで全く問題ありません。3D PCB機能を多用したり、3Dビデオやインタラクティブなプレゼンテーションのようなコンピューターに負荷がかかるタスクを処理する予定があれば、高性能のゲーム用グラフィックカードをSpace Navigatorなどの3Dマウスとともに使用することをお勧めします。

Altium Designerでより高い性能を発揮するために重要なGPU(Graphical Processing Unit)のパラメーターは、FLOPS(Floating Point Operations Per Second)という単位で表される処理能力です。700 GFLOPSを下回るパフォーマンスのGPUを使用することはお勧めしません。これを上回るレベルでは、パフォーマンスは比例的に高くなります。例えば、推奨グラフィックカードの1つであるRadeon RX 470には、3793 GFLOPSのパフォーマンスを持つGPUが搭載されています。

 

注記

利用できる機能は、Altium Designer ソフトウェア サブスクリプション のレベルによって異なります。

Content