A Callout placed on the Board Region View will automatically identify the associated board Layer Stack region, and dimensions may be added to the view to provide details of the stack region areas and divisions; see example.
Board Region Views are available for placement in a Draftsman document in the following ways:
Choose the Place » Additional Views » Board Region View command () from the main menus.
Right-click in the drawing design space then select Place»Additional Views » Board Region View () from the context menu.
Click the Board Region View option () on the additional view objects drop-down on the Active Bar located at the top of the design space. Click and hold an Active Bar button to access other related commands. Once a command has been used, it will become the topmost item on that section of the Active Bar.
Click the button on the Drawing Views toolbar (click Views » Toolbars » Drawing Views).
After launching the command, Layer Stack region drawing data is retrieved from the source PCB file, the cursor will change to a cross-hair and the rendered Board Region View is attached to the cursor. Move the cursor to the desired position then click to confirm the placement.
Note that drawing data is retrieved from the PCB document specified in the Source section of the Properties panel when in Document Options mode. To change the panel to that mode, deselect all objects in the design space (click in free space).
Both the position and size of placed Board Region View may be graphically modified.
A selected Board Region View will show a node handle at the top right of the selection outline, which can be dragged to modify the view's size.
To move a Region View, click within the selection then drag and drop it to a new location.
As a Region View is being dragged, press the Spacebar to rotate the object in 90° increments.
Drag a selected Board Region View to change its position. Drag its resize node to change the drawing scale.
The non-graphical method of editing a Board Region View is available in the Draftsman Properties panel, which provides a comprehensive range of editable properties, options and design content settings for placed Draftsman views.
The Properties panel when a Board Region View is selected.
To open the Properties panel and access the properties of a placed Board Region View:
Double-click on the Board Region View object in the design space.
Right-click on the Board Region View then select Item Properties from the context menu.
If the Properties panel is already active:
Click on the Board Region View object to access its properties in the panel.
To manually open the Properties panel, select View » Panels » Properties from the main menus or click the button at the bottom right of the design space then select Properties from the pop-up menu.