Altium Designer Documentation

Working with the Vias Under SMD Design Rule on a PCB in Altium Designer

Created: March 23, 2017 | Updated: September 27, 2019
現在、バージョン 20.0 をご覧頂いています。 最新情報については、バージョン 21 の をご覧ください。
All Contents

Rule Category: High Speed

Rule Classification: Unary

Summary

This rule specifies whether vias can be placed under SMD pads.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Constraining the Design - Design Rules. For detailed information regarding how to target the objects that you want a design rule to apply to, see Scoping Design Rules.

Constraints

Default constraints for the Vias Under SMD rule.Default constraints for the Vias Under SMD rule.

  • Allow Vias under SMD Pads - specifies whether vias can be placed under the pads of surface mount components.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC, Batch DRC, interactive routing, and autorouting.

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

お問合せ

お近くの営業所にお問合せください。

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: