Altium Designer Documentation

DeSelect

Modified by Jason Howie on Aug 10, 2017

Parent page: Schematic Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: Action=Lasso

Summary

This command is used to deselect design objects within a user-defined, free-form 'lasso' area.

Access

This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:

  • Choosing the Edit » DeSelect » Lasso Deselect command, from the main menus.
  • Pressing X in the main design window to access the DeSelection pop-up menu, and choosing the Lasso Deselect command.

Use

After launching the command, the cursor will change to a cross-hair, and you will enter lasso deselection mode. Deselection is made by performing the following sequence of actions:

  1. Click, or press Enter, to anchor the starting point for the lasso.
  2. Move the cursor to create the free-form outline for the required deselection area.
  3. Once the shape is as required, click, or press Enter, to have the software complete the shape from the last cursor position, back to the starting point.
  4. All objects that fall completely within the boundary of the defined lasso area will be deselected, and you will exit lasso deselection mode.

You can exit lasso deselection mode at any stage by right-clicking, or pressing the Esc key.

Tips

  1. For available resources concerning selection of design objects, see the Select command.


Applied Parameters: Action=InsideArea

Summary

This command is used to deselect any previously selected design objects, within a user-defined area.

Access

This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:

  • Choosing the Edit » DeSelect » Inside Area command, from the main menus.
  • Pressing X in the main design window to access the DeSelection pop-up menu, and choosing the Inside Area command.

Use

After launching the command, the cursor will change to a cross-hair and you will be prompted to select the first corner of the deselection area. Position the cursor and click, or press Enter, to anchor this first corner. You will then be prompted to select the second corner. Move the cursor to size the selection area and click, or press Enter, to anchor this second corner. All selected objects that fall completely inside this defined area will become deselected.

Tips

  1. For available resources concerning selection of design objects, see the Select command.


Applied Parameters: Action=OutsideArea

Summary

This command is used to deselect any previously selected design objects, outside of a user-defined area.

Access

This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:

  • Choosing the Edit » DeSelect » Outside Area command, from the main menus.
  • Pressing X in the main design window to access the DeSelection pop-up menu, and choosing the Outside Area command.

Use

After launching the command, the cursor will change to a cross-hair and you will be prompted to select the first corner of the non-deselection area. Position the cursor and click, or press Enter, to anchor this first corner. You will then be prompted to select the second corner. Move the cursor to size the selection area and click, or press Enter, to anchor this second corner. All selected objects that fall completely (or partially) inside this defined area will remain selected. All selected objects that fall completely outside of this area will become deselected.

Tips

  1. For available resources concerning selection of design objects, see the Select command.


Applied Parameters: Action=TouchingLine

Summary

This command is used to deselect any previously selected design objects, that are touched by a user-defined line.

Access

This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:

  • Choosing the Edit » DeSelect » Touching Line command, from the main menus.
  • Pressing X in the main design window to access the DeSelection pop-up menu, and choosing the Touching Line command.

Use

After launching the command, the cursor will change to a cross-hair and you will be prompted to select the starting point for the deselection line. Position the cursor and click, or press Enter, to anchor this point. Move the cursor to extend the line as required, then click, or press Enter, to anchor its end point. All selected objects that are touched by this line will become deselected.

Tips

  1. For available resources concerning selection of design objects, see the Select command.


Applied Parameters: Action=TouchingArea

Summary

This command is used to deselect any previously selected design objects, that are touched by a user-defined rectangle.

Access

This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:

  • Choosing the Edit » DeSelect » Touching Rectangle command, from the main menus.
  • Pressing X in the main design window to access the DeSelection pop-up menu, and choosing the Touching Rectangle command.

Use

After launching the command, the cursor will change to a cross-hair and you will be prompted to select the first corner of the deselection rectangle. Position the cursor and click, or press Enter, to anchor this first corner. You will then be prompted to select the second corner. Move the cursor to size the rectangle and click, or press Enter, to anchor this second corner. All selected objects that fall completely inside this defined area, or are touched by its boundary, will become deselected.

Tips

  1. For available resources concerning selection of design objects, see the Select command.


Applied Parameters: Action=All

Summary

This command is used to deselect all objects that have previously been selected, on the current document.

Access

This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:

  • Choosing the Edit » DeSelect » All On Current Document command from the main menus.
  • Clicking the  button on the Schematic Standard toolbar (Schematic Editor), or Sch Lib Standard toolbar (Schematic Library Editor).
  • Pressing X in the main design window to access the DeSelection pop-up menu, and choosing the All On Current Document command.

Use

After launching the command, all design objects on the current document will become deselected.

Tips

  1. For available resources concerning selection of design objects, see the Select command.


Applied Parameters: Action=AllOpenDocuments

Summary

This command is used to deselect all previously selected design objects, on all open schematic and schematic library documents.

Access

This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:

  • Choosing the Edit » DeSelect » All Open Documents command, from the main menus.
  • Pressing X in the main design window to access the DeSelection pop-up menu, and choosing the All Open Documents command.

Use

After launching the command, all of the previously selected design objects, on all open schematic and schematic library documents, will become deselected.

Tips

  1. Selected objects on all documents will be deselected, irrespective of the project they belong to.
  2. For available resources concerning selection of design objects, see the Select command.


Applied Parameters: ContextSensitive=True|Action=AllInUnion

Summary

This command is used to deselect all objects in the union of which the object currently under the cursor is a member.

Access

This command is accessed from the Schematic Editor by right-clicking over an object that is a member of the required union, and choosing the Unions » Deselect All In Union command, from the context menu.

Use

First, ensure that the cursor is positioned over an object in the required union, in the main design workspace.

After launching the command, all objects in the union will become deselected.

Tips

  1. For available resources concerning selection of design objects, see the Select command.

 

Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

お問合せ

お近くの営業所にお問合せください。

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
You are reporting an issue with the following selected text
and/or image within the active document:
Altium Designer 無償評価版
Altium Designer 無償評価版
Altium Designerを使用していますか?

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

評価版ライセンスが必要な理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、評価版ライセンスは不要です。

ボタンをクリックして、最新のAltium Designerインストーラをダウンロードしてください。

Altium Designerインストーラをダウンロードする

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

Altium Designerの新規ライセンスのお見積もりをご希望の場合、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerサブスクリプションをご利用中の場合、評価版ライセンスは不要です。

お客様がAltium Designerサブスクリプションの有効なメンバーではない場合、下記のフォームに入力して無償評価版をダウンロードしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Altium Designerを評価する理由を下記から選択してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

無償評価版を使用するには、下記のフォームに入力してください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。

素晴らしいですね。アルティウムではモノづくりに最適なプログラムを提供しています。

Upverterは、コミュニティ主導型の無償プラットフォームで、お客様のような作り手の要求に合わせて設計されています。

試してみる場合、こちらをクリック してください。

弊社の営業担当より詳細情報をご案内しますので、アルティウムジャパン までお問い合わせください。.
Copyright © 2019 Altium Limited

その場合、Altium Designerビューワーの無償ライセンス(有効期間6か月)をダウンロードできます。

下記のフォームに入力してライセンスをリクエストしてください。

プライバシーポリシーに同意の上、[ダウンロード]をクリックしてください。ご登録いただきましたメールアドレスにメールマガジンが送信されます。メール配信の停止は、メール内の​通知設定​​でお手続きいただけます。