ショートカットキー

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Translation is available for NEXUS Client 2.0: Go to the page
 

Perhaps the single thing you can do to become more productive in any software environment is to learn the shortcuts and, once learned, they become second nature. This article takes a look at the default shortcuts available across various key design domains, including how you can access listings while you work, and how you can edit them.

Shortcut Listings

The following sections provide more information (or links to more information) about the shortcuts assigned for use in the software and its various editors. When looking at any of the shortcut key listings, keep in mind the following:

  • When referring to shortcuts, use of the plus (+) symbol denotes holding multiple keys down on the keyboard in the indicated sequence. For example, Shift+F1 means holding down the Shift key then pressing the F1 key. Likewise, Shift+Ctrl+PgUp means holding down the Shift key then holding down the Ctrl key at the same time and pressing the PgUp key.
  • Where use of the standard mouse buttons is made, Click refers to a single click of the left-hand mouse button, Double-Click refers to two clicks of the left-hand mouse button, and Right-Click refers to a single click of the right-hand mouse button.

General Altium Environment Shortcuts

The following shortcuts are typically always available, irrespective of the type of editor that is currently active.

Shortcut Description
F1 Access technical documentation for the resource currently under the cursor (menu or toolbar command, dialog, panel, design object, Query Language keyword).
Ctrl+O Open an existing document using the Open dialog.
Ctrl+F4 Close the active document.
Ctrl+S Save the active document.
Ctrl+Alt+S Save the current document as a new revision of the associated parent item in the connected Workspace. This command is used only when performing a direct edit on a Workspace item.
Ctrl+P Print the active document (where supported).
Alt+F4 Exit Altium NEXUS.
Ctrl+Tab Cycle forward to the next open tabbed document, making it the active document in the design space.
Shift+Ctrl+Tab Cycle backward to the previous open tabbed document, making it the active document in the design space.
F4 Toggle the display of all floating panels.
Shift+F4 Tile all open documents.
Shift+F5 Toggle the focus between the last active panel and the currently active design document in the main design window.
Alt+Right Arrow Step forward to the next document in the sequence of documents that have been made active in the main design window.
Alt+Left Arrow Step back to the previous document, in the sequence of documents that have been made active in the main design window.
F5 Refresh the active document when that document is a web-based document.
Hold Ctrl while moving a panel Prevent automatic docking, grouping, or snapping.
Drag and drop from Windows Explorer into Altium NEXUS Open a document, project, or project group.
Shift+Ctrl+F3 Move to the next message (down) in the Messages panel and cross-probe to the object responsible for the message in the associated document (where supported).
Shift+Ctrl+F4 Move to the previous message (up) in the Messages panel and cross-probe to the object responsible for the message in the associated document (where supported).

Editor-specific Shortcuts

Use the following links to access pages of shortcuts specific to the indicated editor(s).

Accessing Shortcuts

In a multi-editor environment like Altium NEXUS, it can be hard to remember the shortcuts, particularly those special-purpose ones that are available when you are running a command. To help with this, the software provides some ways to 'look up' key shortcuts.

While Running an Interactive Command

When running an interactive command within the Schematic and PCB editors - for example Place » Wire in a schematic or Route » Interactive Routing in the PCB - use the Shift+F1 keyboard shortcut to access a menu listing all valid shortcuts for that stage of the interactive command. You can either process another command by choosing it from the menu, or press Esc to close the menu without impact on the currently running command (and use the desired shortcut thereafter).

Use the Shift+F1 shortcuts menu to refresh your memory about the shortcuts available or use it in the traditional menu sense to select the required option with the mouse. Shown here is the menu when placing a wire on a schematic. Hover over the image to see the menu when interactively routing a connection on a PCB.Use the Shift+F1 shortcuts menu to refresh your memory about the shortcuts available or use it in the traditional menu sense to select the required option with the mouse. Shown here is the menu when placing a wire on a schematic. Hover over the image to see the menu when interactively routing a connection on a PCB.

Alternatively, and for some interactive commands, use the F1 keyboard shortcut. This gives access to the Graphical Editing Hot key List dialog, providing a list of the shortcuts available. Note that the dialog is purely for guidance - the commands cannot be launched from within the dialog.

Use the Graphical Editing Hot key List dialog to refresh your memory about the shortcuts available for the currently running interactive command. Shown here is the dialog when placing a wire on a schematic. Hover over the image to see the dialog when interactively moving a component on a PCB.Use the Graphical Editing Hot key List dialog to refresh your memory about the shortcuts available for the currently running interactive command. Shown here is the dialog when placing a wire on a schematic. Hover over the image to see the dialog when interactively moving a component on a PCB.

Rather than using the Close button to exit the dialog, which can affect the currently running command with a change to the current cursor location, press Esc or Enter instead.

When Configuring Editor Resources

When customizing the menus and toolbars for an editor in Altium NEXUS, a listing of the general shortcuts available in that editor, as well as interactive shortcuts (where supported), will be available to browse.

Quickly enter customization mode for the active editor by double-clicking in the blank area to the right of the main Help menu entry. For more information on customizing your installation of Altium NEXUS, see Configuration & Customization.

Access a listing of shortcuts when customizing an editor. Shown here is the listing of general shortcuts for the Schematic Editor (notice that there is also a listing of interactive shortcuts). Hover over the image to see the listing of general shortcuts for the PCB Editor.Access a listing of shortcuts when customizing an editor. Shown here is the listing of general shortcuts for the Schematic Editor (notice that there is also a listing of interactive shortcuts). Hover over the image to see the listing of general shortcuts for the PCB Editor.

Editing Shortcuts

The fastest way to add or edit the shortcut(s) assigned to a command is to Ctrl+click on the entry for that command on the relevant menu or toolbar. This will open the Edit Command dialog, from where you can add a shortcut or edit the currently assigned one.

To add or edit a shortcut for a particular command, hold Ctrl as you click on that command's menu or toolbar entry to open the Edit Command dialog.
To add or edit a shortcut for a particular command, hold Ctrl as you click on that command's menu or toolbar entry to open the Edit Command dialog.

To define the shortcut, click in the Primary field (in the Shortcuts region of the dialog), then press the key combination you want to use on your keyboard. Alternatively, use the drop-down list then scroll to the required key(s). If you want a second, different shortcut associated to the command, use the Alternative field, in the same way you setup the Primary field. If a shortcut key combination is currently in use, the command using it will be displayed below in the relevant Currently in use by field. If you continue with the new assignment, it will be removed from that other command.

Accelerator Keys

In addition to standard keyboard shortcuts, Altium NEXUS also employs the use of Accelerator Keys. These are used as part of the main menu system (not right-click context menus) to be able to access commands through the sequential use of one or more such keys.

Specifying an Accelerator Key

An accelerator key is specified as part of a menu (main or sub) or command's caption by adding the ampersand (&) character immediately before the letter that you want to use as the accelerator. Within a menu, the current accelerator key is distinguished by the use of underlining.

Ctrl+Click on a main menu or sub-menu entry, to access the Edit Drop Down Menu dialog. Ctrl+Click on a command entry to access the Edit Command dialog. Add the & character at the required position within the defined Caption.

An accelerator key is created by placing an & character before that letter in a command or menu's caption. Shown here is the accelerator key 'R' for the Rules command. Hover over the image to see the definition of the accelerator ('m') for the Rooms sub-menu.An accelerator key is created by placing an & character before that letter in a command or menu's caption. Shown here is the accelerator key 'R' for the Rules command. Hover over the image to see the definition of the accelerator ('m') for the Rooms sub-menu.

Within any given menu or sub-menu, a particular letter can be used only once as an accelerator key.

Main Menu Accelerators

Strictly speaking, access to a root main menu through its accelerator key requires holding down the Alt key. This is because the same key may also be assigned to a pop-up menu. So for example, access to the Simulate menu in the Schematic Editor (with the Mixed Simulation system extension installed) would, at first sight, look to be a case of clicking the S key. However, while this is the menu's defined accelerator key, doing so will pop-up the Select sub-menu (from the main Edit menu). By using Alt+S, the intended Simulate menu is accessed.

The accelerator key for a main menu could be used as the popup key for a different sub-menu. Using Alt+&lt;MenuAcceleratorKey&gt; will always access that main menu.The accelerator key for a main menu could be used as the popup key for a different sub-menu. Using Alt+<MenuAcceleratorKey> will always access that main menu.

In many cases, a main menu will also have a pop-up key assigned (and typically the same key as its accelerator). Where this is the case, using that key will access the menu in pop-up form. For example, the Design menu in the PCB Editor can strictly be accessed using Alt+D, but also in pop-up form using D. This functionality is defined for a menu in the Edit Drop Down Menu dialog, by using the Popup Key field.

A menu can be accessed as a pop-up by specifying a popup key.A menu can be accessed as a pop-up by specifying a popup key.

For obvious reasons, pop-up keys are not assigned to menus in text-based editors, and so main menus can only be accessed through use of the Alt key.

The following table summarizes the accelerator and pop-up keys assigned to various main menus available across editors:

Menu Accelerator Key Popup Key
File F F
Edit E E
View V V
Project C C
Place P P
Design D D
Tools T T
Route
(PCB Editor only)
U U
Reports R R
Simulate
(Schematic Editor only)
S -
Window W W
Help H H

Accelerator Key Sequence Examples

Expand one of the following collapsible sections to access a listing of example accelerator key sequences available for the indicated editor. With hundreds of permutations available, you will soon build your own list of favorite keyboard sequences that you will want to keep in mind and use as you design.

When referring to accelerator key sequences, use of the comma (,) symbol denotes pressing each key in the sequence in succession. For example, T, V, U means press the T key, then press the V key, and then press the U key.
In some of the examples, accelerator keys are used in combination with key sequences within dialogs, ultimately arriving at a quick sequence of keystrokes to achieve a dialog setting and apply it.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content