Altium NEXUS Documentation

Configuring Schematic Rectangle Object Properties in Altium NEXUS

Created: September 27, 2019 | Updated: October 17, 2019
現在、バージョン 3.1 をご覧頂いています。 最新情報については、バージョン 4 の をご覧ください。
All Contents

Parent page: Rectangle

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Rectangle object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (accessed from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.

  • Post-placement settings – all Rectangle object properties are available for editing in the Rectangle dialog and the Properties panel when a placed Rectangle is selected in the workspace.

          

If the Double Click Runs Interactive Properties option is disabled (default) on the Schematic - Graphical Editing page of the Preferences dialog, when the primitive is double-clicked or you right-click on a selected primitive then choose Properties, the dialog will open. When the Double Click Runs Interactive Properties option is enabled, the Properties panel will open. 
While the options are the same in the dialog and the panel, the order and placement of the options may differ slightly. 
In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as "Properties panel only".

Location (Properties panel only)

  • (X/Y)
    • X (first field) - the current X (horizontal) coordinate of the reference point of the object, relative to the current workspace origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
    • Y (second field) - The current Y (vertical) coordinate of the reference point of the object, relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 

Properties

  • Width - enter the width of the object, which may be edited.
  • Height - enter the height of the object, which may be edited.
  • Border - use the drop-down to select the default from the available choices: SmallestSmallMedium, and Large. Click on the color box to access a drop-down from which you can select the default border color.
  • Fill Color - check to enable fills. Click on the color box to access a drop-down from which you can select the default fill color.
  • Transparent - check to make the primitive transparent.
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

お問合せ

お近くの営業所にお問合せください。

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: