KB: Content Cart Transfer Fails with Revision or Access Denied Errors

Altium On-Prem Enterprise Server Altium On-Prem Enterprise Server
Content Cart transfers between Altium Workspaces may fail with revision or destination vault access denied errors when Windows Session authentication is used. Resetting Altium Designer preferences and reconnecting to the source and target Workspaces using built-in credentials can resolve the authentication issue and allow the transfer to complete.

Solution Details

Revision And Access Errors During Transfer

Users may experience revision-related errors or destination vault access denied errors while transferring released managed content between Workspaces using the Content Cart feature. The issue can occur even when authentication works correctly outside of Content Cart and the user has administrative privileges on both Altium Enterprise Servers.

Windows Session Authentication Can Interfere With Transfers

The issue can occur when Windows Session authentication is active for both server connections. Under this configuration, Content Cart may fail to correctly authenticate transfer operations, resulting in revision and access-related errors.

Use Built-In Credentials For Server Connections

  • Verify that the target Workspace can connect to the source Workspace before troubleshooting the transfer.
  • Do not use Windows Session authentication for the Content Cart transfer workflow.
  • Reset Altium Designer preferences if required.
  • Reconnect to both servers using built-in credentials.

Reconnect And Retry The Content Transfer

  1. Open Altium Designer.
  2. Reset Altium Designer preferences.
  3. Sign out of both server connections.
  4. Reconnect to the source and destination servers using built-in credentials instead of Windows Session authentication.
  5. Verify that both server connections are authenticated successfully and that the target Workspace can connect to the source Workspace.
  6. Open the Explorer panel and browse the source Workspace.
  7. Select the required Item Revision and use Operations » Add to Content Cart to add it to the Content Cart.
  8. Configure the target Workspace and required acquisition settings in Content Cart.
  9. Retry the content transfer operation.
  10. Confirm that the transfer completes without revision or access denied errors.

References

問題が見つかった場合、文字/画像を選択し、Ctrl + Enter キーを押してフィードバックをお送りください。