다층에서 폴리리전과 패드 사이의 클리어런스 제약
Updated: January 23, 2025
Altium Designer
PCB 레이아웃에서 "다층의 폴리리전과 상단 레이어의 패드 사이의 클리어런스 제약"이라는 오류가 발생합니다. 모든 패드와 관통 구성 요소에서 이 오류가 발생합니다. "위반 사항으로 이동"을 클릭하면 보드의 모서리로 이동하며 클리어런스 위반만 표시됩니다.
개요
I have an error stating "Clearance Constraint between polyregion on multilayer and pad on top layer"
on my PCB layout. Every pad is having this error, as well as a through hole component. When I click to "jump to" the violation... It goes to the corner of the board and just says there is a clearance violation.
on my PCB layout. Every pad is having this error, as well as a through hole component. When I click to "jump to" the violation... It goes to the corner of the board and just says there is a clearance violation.
Solution Details
This error usually occurs when you do not have any stackup assigned to the board. You can go to board planning mode (by pressing the "1" key), then right-click on a board region to choose Properties from the context menu which will bring up the Board Region dialog so that you can assign the stack up to the board region.
Here's documentation with a little more detail:
Board Region