Dlg-ImportMCADBaselineImport MCAD Baseline_AD

Вы просматриваете версию 18.1. Для самой новой информации, перейдите на страницу Dlg-ImportMCADBaseline((Import MCAD Baseline))_AD для версии 22
Applies to Altium Designer versions: 18.0 and 18.1

The Import MCAD Baseline dialog
The Import MCAD Baseline dialog

Summary

The Import MCAD Baseline dialog is used to Import an IDX file (MCAD Baseline.idx). This file type is used for collaborating between ECAD and MCAD domains. Altium Designer facilitates this collaboration using the Mechanical CAD Collaboration extension, which is necessary to access this dialog.

Access

From the PCB Editor, click Import » MCAD IDX Baseline from the main menus.

The Mechanical CAD Collaboration extension (shown below) must be installed to access this dialog.

The extension can be found on the Purchased tab of the Extensions & Updates page (accessed by using the  drop-down at the top-right of the workspace then choosing Extensions and Updates).

Options/Controls

  • Input MCAD Baseline File - click  to browse for and select the desired IDX file to be imported.
  • Output PCB File - click  to browse for and select the desired PCB file into which proposed changes are to be synchronized.
Once the MCAD Baseline IDX file has been imported, collaboration proceeds through the Mechanical CAD Collaboration panel. For more information, see IDX Support.
Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.