Configuring Multi-board Schematic Arc Object Properties in Altium Designer

Вы просматриваете версию 20.2. Для самой новой информации, перейдите на страницу Configuring Multi-board Schematic Arc Object Properties in Altium Designer для версии 21
Applies to Altium Designer versions: 19.1, 20.0, 20.1 and 20.2

Parent page: Arc

Multi-board object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Arc object properties, or those that can logically be pre-defined, are available as editable default settings on the Multi-board Schematic - Defaults page of the Preferences dialog (access from the  button at the top-right of the design space). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Arc object properties are available for editing in the Properties panel when a placed Arc is selected in the design space.

 The Arc object default settings in the Preferences dialog and the Arc mode of the Properties panel. The Arc object default settings in the Preferences dialog and the Arc mode of the Properties panel.

In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as; 'Properties panel only'.

Geometry (Properties panel only)

  • (X/Y) – the X-axis and Y-axis values of the arc's center point relative to the document origin.
  • Radius – the radius (center to perimeter distance) of the selected Arc.
  • Start Angle – the angle of the Arc start point relative to the arc center in the X-axis.
  • End Angle – the angle of the Arc end point relative to the arc center in the X-axis.

Graphical

  • Line  – displays the Arc's current outline weight/style/color.
    • Line weight – use to define the line thickness. Use the drop-down to choose from a range of line weight presets.
    • Line pattern – use to define the pattern style applied to line. Use the drop-down to choose from a range of line style presets.
    • Line color ( ) – click to open the line color selector, which includes options for preset colors, HEX/RGB color values, the graphic selection of color shades, and variable color opacity.
Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.