Working with the Daisy Chain Stub Length Design Rule on a PCB in Altium Designer

Вы просматриваете версию 17.1. Для самой новой информации, перейдите на страницу Working with the Daisy Chain Stub Length Design Rule on a PCB in Altium Designer для версии 21
Applies to Altium Designer versions: 16.0, 16.1, 17.0 and 17.1
 

Rule Category: High Speed

Rule Classification: Unary

Summary

This rule specifies the maximum permissible stub length for a net with a daisy chain topology.

Constraints

Default constraints for the Daisy Chain Stub Length rule.

Default constraints for the Daisy Chain Stub Length rule.

  • Maximum Stub Length - the value for the maximum stub length allowed.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC and Batch DRC.

Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.

Content