Working with the Vias Under SMD Design Rule on a PCB in Altium Designer

Вы просматриваете версию 15.1. Для самой новой информации, перейдите на страницу Working with the Vias Under SMD Design Rule on a PCB in Altium Designer для версии 21
Applies to Altium Designer version: 15.1
 

Rule Category: High Speed

Rule Classification: Unary

Summary

This rule specifies whether vias can be placed under SMD pads.

Constraints

Default constraints for the Vias Under SMD rule.

Default constraints for the Vias Under SMD rule.

  • Allow Vias under SMD Pads - specifies whether vias can be placed under the pads of surface mount components. (Default = disabled).

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC, Batch DRC, and during interactive routing and autorouting.

Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.

Content