Configuring Schematic Bezier Object Properties in Altium Designer

Вы просматриваете версию 18.0. Для самой новой информации, перейдите на страницу Configuring Schematic Bezier Object Properties in Altium Designer для версии 21
Applies to Altium Designer versions: 18.0 and 18.1

Parent page: Bezier

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Bezier object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Bezier object properties are available for editing in the Properties panel when a placed Bezier is selected in the workspace.

The Bezier default settings in the Preferences dialog and the Bezier mode of the Properties panel   The Bezier default settings in the Preferences dialog and the Bezier mode of the Properties panel

Properties

  • Curve Width - use the drop-down to select the desired curve width. Choices are Smallest, Small, Medium, and Large. Click the color box to set the desired color.
Примечание

Доступные функциональные возможности зависят от вашего уровня Подписки на ПО Altium Designer.