Altium NEXUS Documentation

Defining Server Preferences for Altium NEXUS

Created: 23.06.2017 | Updated: 13.07.2021

Parent page: Data Management Preferences

The Data Management - Servers page of the Preferences dilaog (when not signed into a server). Hover over the image to view the page when signed into a server.The Data Management - Servers page of the Preferences dilaog (when not signed into a server). Hover over the image to view the page when signed into a server.

Summary

The Data Management – Servers page of the Preferences dialog includes controls to configure current managed content server usage, project release options, and schematic and PCB document comments.

Access

The Data Management – Servers page is part of the main Preferences dialog that is accessed by clicking the  control in the upper-right corner of the workspace then selecting the Servers entry under the Data Management folder.

Options/Controls

Servers

  • Active - this region displays information for the currently active managed content server. 
    • Off/On - click to toggle between connecting and disconnecting to/from the managed content server. When Off is selected, a confirmation dialog opens to confirm your decision to disconnect from the managed content server. Clicking Yes in the confirmation dialog will immediately disconnect you from the managed content server. In order to reconnect to the managed content server, use the Sign In command in the upper-right corner of the main workspace as stated in this region of the dialog.
    • Active/Connected - when Active is displayed, this is the server that is currently active. When Connected is displayed, you are connected to this server but it is not currently the active server.
    • Properties - click to access a drop-down to edit the properties. Choices are:
  • Known Servers - click to open information for any available (yet not currently active) servers.  
    • Off/On - click to toggle between connecting and disconnecting to/from the server. When Off is selected, a confirmation dialog opens to confirm your decision to disconnect from the server. Clicking Yes in the confirmation dialog will immediately disconnect you from the server. In order to reconnect to the server, use the Sign In command in the upper-right corner of the main workspace as stated in this region of the dialog.
    • Active/Connected - when Active is displayed, this is the server that is currently active. When Connected is displayed, you are connected to this server but it is not currently the active server.
    • Properties - click to access a drop-down to edit the properties. Choices are:
    • Automatically connect Altium Content Vault - enable to automatically connect to the Altium Content Vault.

Project Release

  • Folder for temporary files storage during release generation
    • Automatically (in system %temp% folder) - select to automatically generate folder for file storage during release.
    • Manually - select to manually generate folder for file storage during release. When enabled, use the browse icon to search for and select the desired folder.
    • Delete contents after exiting release mode - enable to delete the contents of the folder after completing release.
    • Prepend revision HRID to file names - add prefix of revision to file names.

Document Comments

This region is not available if you are not signed into a managed content server.
  • Schematic 
    • ​Show Comment Threads - enable to show schematic comments.
    • Alignment - use the drop-down to select the desired alignment: Left, Right, or Center.
    • Text Margin - enter the desired margin for text.
    • Text Color - click the color swatch to open the Choose Color dialog in which you can select the desired color.
    • Font - click the link to open the standard Font dialog in which you can select the desired font.
    • Reference Line Color - click the color swatch to open the Choose Color dialog in which you can select the desired color.
    • Reference Line Width - use the drop-down to select the width of the reference line. Choices include: Smallest, Small, Medium, and Large.
    • Reference Line Style - use the drop-down to select the style of the reference line. Choices include: Solid, Dash, Dot, Dash-Dot, and Dash-Dot-Dot.
  • PCB
    • Show Comment Threads - enable to show schematic comments.
    • Mask Area Color - click the color swatch to open the Choose Color dialog in which you can select the desired color.
    • Mask Area Alpha - use the slider bar to configure masking level.
    • Text Color - click the color swatch to open the Choose Color dialog in which you can select the desired color.
    • Reference Line Color - click the color swatch to open the Choose Color dialog in which you can select the desired color.
    • Reference Line Width - use the drop-down to select the width of the reference line. Choices include: Smallest, Small, Medium, and Large.
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: