Свойства Bus Entry

Вы просматриваете версию 1.1. Для самой новой информации, перейдите на страницу Свойства Bus Entry для версии 4
Applies to NEXUS Client versions: 1.0 and 1.1

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

 

Parent page: Bus Entry

Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Bus Entry object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (accessed from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Bus Entry object properties are available for editing in the Properties panel when a placed Bus Entry is selected in the workspace.

The Bus Entry default settings in the Preferences dialog and the Bus Entry mode of the Properties panel            The Bus Entry default settings in the Preferences dialog and the Bus Entry mode of the Properties panel

Properties

  • Start (X/Y) 
    • X (first field) - the current X (horizontal) coordinate of the reference point of the object relative to the current workspace origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
    • Y (second field) - The current Y (vertical) coordinate of the reference point of the object relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
  • End (X/Y) -
    • X (first field) - the current X (horizontal) coordinate of the reference point of the object relative to the current workspace origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
    • Y (second field) - The current Y (vertical) coordinate of the reference point of the object relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default. 
  • Size (X/Y) - the bus entry size.
  • ​Width - use the drop-down to select the desired width. Choices are: Smallest, Small, Medium, and Large. Click the color box to select the desired color for the object.
  • Color - click the color box to select the desired color for the object.
Content