Violations Associated with Connections – Нарушения, связанные с соединениями

Вы просматриваете версию 3.1. Для самой новой информации, перейдите на страницу Violations Associated with Connections – Нарушения, связанные с соединениями для версии 5
Applies to NEXUS Client versions: 4 and 5

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: Verifying Your Design Project

The Violations Associated with Connections region on the Error Reporting tab of the Project Options dialog
The Violations Associated with Connections region on the Error Reporting tab of the Project Options dialog

Logical, electrical, and drafting awareness in the schematic diagram of your Multi-board Design project can be verified during design project verification according to rules defined as part of the options for the design project – on the Error Reporting tab of the Project Options dialog.

Violations associated with Multi-board Design projects are only presented after running an Electrical Rules Check (ERC) from the project's Multi-board Schematic document (*.MbsDoc). Do this by choosing the Design » Run ERC command from the main menu.

For more information about creating Multi-board schematics, see the Capturing the Logical System Design page.

The Violations Associated with Connections region on the Error Reporting tab of the Project Options dialog allows specifying the severity level associated with check of connection-related violations that can exist in source documents when validating a Multi-board project. Use the following collapsible sections to access information on each violation available in this region.