Altium NEXUS Documentation

HideObject

Последнее изменение: Admin; 11.04.2017

Parent page: WorkspaceManager Commands

The following pre-packaged resources, derived from this base command, are available:


Applied Parameters: ObjectKind=FocusedDocument

Summary

This command is used to hide the currently focused, and open, document. The document does not need to be the active document. Documents are hidden in order to prevent clutter in the tabbed area of the main design window. When a document is hidden, it is still open from the point of view of processes such as compilation, synchronization, andannotation, it is just not displayed as a tabbed-document in the main design window.

Access

This command can be accessed by:

  • Right-clicking over the entry for a document in the Projects panel, and choosing the Hide command from the context menu.
  • Focusing the entry for a document in the Projects panel, then clicking the panel's Project button and choosing the Hide command from the context menu.
The command is only available provided the focused document is open and not hidden.

Use

First, ensure that the document you wish to hide is the focused document in the Projects panel.

After launching the command, the focused document will be hidden. This document will no longer appear visible in the main design window.

Tips

  1. An entity in the Projects panel is focused either by clicking on it, or right-clicking on it. To distinguish it as being the focused entry, it appears with a dotted border
  2. Documents can be either hidden manually, or automatically as part of a specific process. For example, when compiling a project or performing back-annotation, initially closed source documents will be opened and hidden automatically.
  3. Any number of design documents may be hidden.
  4. A number of commands for hiding documents can also be found on the right-click context menu associated with the document tab for an open document (or grouping of documents). These commands can include the bility to hide: The active document, all documents of the same type, all documents in the group, all other documents, or all documents.
  5. Up to 16 hidden documents can be listed on the Window » Unhide sub-menu. The hidden documents are listed in alphabetical order. If more than 16 documents are hidden, the remaining documents will appear on the sub-menu, as and when you choose to 'unhide' documents, and therefore create room on the menu.
  6. To determine which documents are hidden - especially if you have hidden more documents than can be included on the Window » Unhide sub-menu - click the drop-down part of the  button on the Projects panel, and enable the Show open/modified status option (part of the General cluster of options). This option can also be enabled from the System - Projects Panel page of the Preferences dialog. Hidden documents are given the blank document icon - . Alternatively, hover the mouse over the icon to obtain textual confirmation of the document's status.
  7. Hidden documents can also be accessed by clicking the  button, at the far right of the tabbed document bar. This gives access to a menu of hidden documents. Click a document entry to unhide it. The menu can hold up to 10 hidden documents, after which all hidden documents will be grouped into sub-menus, by document type.


Applied Parameters: ObjectKind=FocusedCategory

Summary

This command is used to hide all documents that are currently open within the focused sub-folder in the Projects panel. Documents are hidden in order to prevent clutter in the tabbed area of the main design window. When a document is hidden, it is still open from the point of view of processes such as compilation, synchronization, andannotation, it is just not displayed as a tabbed-document in the main design window.

Access

This command can be accessed by:

  • Right-clicking over the entry for a category (folder) in the Projects panel, and choosing the Hide All command from the context menu.
  • Focusing the entry for a category (folder) in the Projects panel, then clicking the panel's Project button and choosing the Hide All command from the context menu.
The command is only available provided there is at least one document in the category that is open and not hidden.

Use

First, ensure that the sub-folder whose documents you wish to hide is focused in the Projects panel.

After launching the command, all currently open documents residing within the focused sub-folder, or descendant folders therein, will be hidden (if not already).

Tips

  1. An entity in the Projects panel is focused either by clicking on it, or right-clicking on it. To distinguish it as being the focused entry, it appears with a dotted border
  2. Documents can be either hidden manually, or automatically as part of a specific process. For example, when compiling a project or performing back-annotation, initially closed source documents will be opened and hidden automatically.
  3. Any number of design documents may be hidden.
  4. A number of commands for hiding documents can also be found on the right-click context menu associated with the document tab for an open document (or grouping of documents). These commands can include the bility to hide: The active document, all documents of the same type, all documents in the group, all other documents, or all documents.
  5. Up to 16 hidden documents can be listed on the Window » Unhide sub-menu. The hidden documents are listed in alphabetical order. If more than 16 documents are hidden, the remaining documents will appear on the sub-menu, as and when you choose to 'unhide' documents, and therefore create room on the menu.
  6. To determine which documents are hidden - especially if you have hidden more documents than can be included on the Window » Unhide sub-menu - click the drop-down part of the  button on the Projects panel, and enable the Show open/modified status option (part of the General cluster of options). This option can also be enabled from the System - Projects Panel page of the Preferences dialog. Hidden documents are given the blank document icon - . Alternatively, hover the mouse over the icon to obtain textual confirmation of the document's status.
  7. Hidden documents can also be accessed by clicking the  button, at the far right of the tabbed document bar. This gives access to a menu of hidden documents. Click a document entry to unhide it. The menu can hold up to 10 hidden documents, after which all hidden documents will be grouped into sub-menus, by document type.


Applied Parameters: ObjectKind=FocusedProject

Summary

This command is used to hide all currently open documents associated with the focused project. Documents are hidden in order to prevent clutter in the tabbed area of the main design window. When a document is hidden, it is still open from the point of view of processes such as compilation, synchronization, andannotation, it is just not displayed as a tabbed-document in the main design window.

Access

This command can be accessed by:

  • Right-clicking over the entry for a project in the Projects panel, and choosing the Hide All In Project command from the context menu.
  • Focusing the entry for a project in the Projects panel, then clicking the panel's Project button and choosing the Hide All In Project command from the context menu.
The command is only available provided there is at least one document in the project that is open and not hidden

Use

First, ensure that the project you wish to hide all documents for, is focused in the Projects panel.

After launching the command, all open design documents associated with the focused project will be hidden. These documents will no longer appear visible in the main design window.

Tips

  1. An entity in the Projects panel is focused either by clicking on it, or right-clicking on it. To distinguish it as being the focused entry, it appears with a dotted border
  2. Documents can be either hidden manually, or automatically as part of a specific process. For example, when compiling a project or performing back-annotation, initially closed source documents will be opened and hidden automatically.
  3. Any number of design documents may be hidden.
  4. A number of commands for hiding documents can also be found on the right-click context menu associated with the document tab for an open document (or grouping of documents). These commands can include the bility to hide: The active document, all documents of the same type, all documents in the group, all other documents, or all documents.
  5. Up to 16 hidden documents can be listed on the Window » Unhide sub-menu. The hidden documents are listed in alphabetical order. If more than 16 documents are hidden, the remaining documents will appear on the sub-menu, as and when you choose to 'unhide' documents, and therefore create room on the menu.
  6. To determine which documents are hidden - especially if you have hidden more documents than can be included on the Window » Unhide sub-menu - click the drop-down part of the  button on the Projects panel, and enable the Show open/modified status option (part of the General cluster of options). This option can also be enabled from the System - Projects Panel page of the Preferences dialog. Hidden documents are given the blank document icon - . Alternatively, hover the mouse over the icon to obtain textual confirmation of the document's status.
  7. Hidden documents can also be accessed by clicking the  button, at the far right of the tabbed document bar. This gives access to a menu of hidden documents. Click a document entry to unhide it. The menu can hold up to 10 hidden documents, after which all hidden documents will be grouped into sub-menus, by document type.


Applied Parameters: ObjectKind=All

Summary

This command is used to hide all currently open documents. Documents are hidden in order to prevent clutter in the tabbed area of the main design window. When a document is hidden, it is still open from the point of view of processes such as compilation, synchronization, andannotation, it is just not displayed as a tabbed-document in the main design window.

Access

This command is accessed, from most editors by choosing the Window » Hide All command, from the main menus.

The command is only available provided there is at least one document that is open and not hidden.

Use

After launching the command, all open design documents will be hidden. In the main design window, the documents will no longer be visible.

Tips

  1. An entity in the Projects panel is focused either by clicking on it, or right-clicking on it. To distinguish it as being the focused entry, it appears with a dotted border
  2. Documents can be either hidden manually, or automatically as part of a specific process. For example, when compiling a project or performing back-annotation, initially closed source documents will be opened and hidden automatically.
  3. Any number of design documents may be hidden.
  4. A number of commands for hiding documents can also be found on the right-click context menu associated with the document tab for an open document (or grouping of documents). These commands can include the bility to hide: The active document, all documents of the same type, all documents in the group, all other documents, or all documents.
  5. Up to 16 hidden documents can be listed on the Window » Unhide sub-menu. The hidden documents are listed in alphabetical order. If more than 16 documents are hidden, the remaining documents will appear on the sub-menu, as and when you choose to 'unhide' documents, and therefore create room on the menu.
  6. To determine which documents are hidden - especially if you have hidden more documents than can be included on the Window » Unhide sub-menu - click the drop-down part of the  button on the Projects panel, and enable the Show open/modified status option (part of the General cluster of options). This option can also be enabled from the System - Projects Panel page of the Preferences dialog. Hidden documents are given the blank document icon - . Alternatively, hover the mouse over the icon to obtain textual confirmation of the document's status.
  7. Hidden documents can also be accessed by clicking the  button, at the far right of the tabbed document bar. This gives access to a menu of hidden documents. Click a document entry to unhide it. The menu can hold up to 10 hidden documents, after which all hidden documents will be grouped into sub-menus, by document type.

 

Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе:
Бесплатная пробная версия Altium Designer
Бесплатная пробная версия Altium Designer
Давайте приступим. Для начала, Вы или Ваше предприятие уже используете Altium Designer?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

В таком случае, для чего Вам необходима пробная лицензия?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вам для этого не нужна пробная лицензия.

Нажмите кнопку ниже, чтобы загрузить установщик самой новой версии Altium Designer

Загрузить установщик Altium Designer

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Пожалуйста, заполните форму ниже, чтобы получить ценовое предложение.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Если Ваша подписка Altium активна, у Вас нет необходимости в пробной лицензии.

Если у Вас нет активной подписки Altium, пожалуйста, заполните форму ниже, чтобы получить пробную версию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Для чего Вы хотите попробовать Altium Designer?

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вы нашли нужное место! Пожалуйста, заполните форму ниже, чтобы начать использование пробной версии.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Вы можете загрузить бесплатную лицензию средства просмотра Altium Designer Viewer сроком действия 6 месяцев.

Пожалуйста, заполните форму ниже, чтобы запросить эту лицензию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.

Замечательно! Создавать новое - отличное занятие. У нас есть превосходная программа для Вас.

Upverter - бесплатная платформа, разработанная специально для любителей проектирования.

Нажмите здесь, чтобы попробовать!

Если Вы хотите поговорить с представителем, пожалуйста, свяжитесь с местным офисом Altium.
Copyright © 2019 Altium Limited

Вы можете загрузить бесплатную лицензию средства просмотра Altium Designer Viewer сроком действия 6 месяцев.

Пожалуйста, заполните форму ниже, чтобы запросить эту лицензию.

Нажимая [Получить бесплатнную пробную версию], Вы соглашаетесь с нашей Политикой конфиденциальности. Вам могут приходить сообщения от компании Altium, и Вы можете изменить настройки уведомлений в любой момент.