Why are PCB 3D Models not Displaying in the 3D View?

Created: 25.03.2021 | Updated: 12.08.2021

The display of 3D body models in the PCB 3D view is controlled by a setting in the View Configuration Panel. We will take a look at how to ensure this option is enabled.

Starting in Version: 18.0
Up to Version: Current

Solution Details

The 3D model display is controlled by the Show 3D Bodies setting. To show your 3D models, ensure this option is turned on in the View Configuration panel:

View ► Panels ► View Configuration ► View Options ► Show 3D Bodies

For more information on this area of the software, please review the following page in our documentation: https://www.altium.com/documentation/altium-designer/pcb-pnl-viewconfigurationview-configuration-ad

Additional 3D body view control can be performed on the body in the PCB Panel's 3D Editor section.
In this section, the blue cone controls the visibility of the displayed model. Clicking the cone will toggle through opacity levels, or you can select directly from the drop-down as shown in the image. More information is available here: https://www.altium.com/documentation/altium-designer/pcb-pnl-pcbpcb-3d-models-ad

View ► Panels ► PCB ► 3D Models

The Opacity can also be controlled by the component properties in the Properties panel once the component is selected:

View ► Panels ► Properties

Was this article helpful?
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: