How to change the Port Cross Reference Display?

Created: 25.03.2021 | Updated: 18.09.2021

I'd like to add port references to my schematic, but I don't want to include the zone or grid references in order to save space.

Starting in Version: 18.0
Up to Version: 20.1

Solution Details

The port cross reference details added to ports in your schematic by the command

Reports ► Port Cross Reference ► Add to Project

The format is set in the Port Cross References section in the preferences here:

Preferences Schematic General Port Cross References   

To remove the Zone or X and Y Coordinates, set the Location Style pull-down choice list to "None".  Additional settings are available for the Sheet Style, including Name, Number, or None.

Once you select OK in the preferences, run the following command to see the changes:

Reports ► Port Cross Reference ► Update on Project  

Further reading is available in our documentation:

Update:  With AD21.6 the Port Cross Reference Add and Remove commands were removed from the Reports menu and are replaced with the new Automatic Cross References Settings command. Selecting this command will open the Options tab of the Project Options dialog where you can toggle the feature on/off.  This change is more thoroughly explained in this document:
Was this article helpful?
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: