Background Turns Dark when Placing Track

Created: 25.03.2021 | Updated: 12.08.2021

Pressing P, T to place track. Once a net is clicked on to route, the background turns dark. This is a problem because I am now routing my board blind. Can't find the setting to fix this

Starting in Version: 18.0
Up to Version: Current

Solution Details

When you enter track placement mode, as soon as you click (or press Enter) to anchor the end point, everything dims except the current Net. You can turn this off in Preferences ► PCB Editor ► Display ► Highlighting Options section then uncheck the box for "Apply Mask During Interactive Editing"

You'll find this:
Apply Mask During Interactive Editing - enable to mask non-selected objects during interactive editing. Masking makes it easier to focus on the objects being edited as non-selected objected objects are 'faded'.

In here:

Here's another knowledge article that discusses how to adjust the level of Masking and Dimming that occurs (in case you don't want to turn it off entirely.):
PCB Select and Dimming
Was this article helpful?
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: