Delete a line from BOM

Created: 25.03.2021 | Updated: 12.08.2021

Is there a way to delete a line in the draftsman Bill Of Materials table? I have a test point that showed up there, and I am looking for a way to remove it.

Starting in Version: 18.0
Up to Version: Current

Solution Details

Unfortunately, you cannot directly delete a component line item from BOM, ActiveBOM or Draftsman. You can however have the line not show up in the first place by changing the type of the component to "Standard (NoBOM)" This Component type is defined as: components that possess standard electrical properties, are always synchronized between the schematic and PCB (the footprint, pins/pads and net assignments must all match), and are not included in the BOM. An example is a testpoint component that you want to exclude from the BOM.

Type.png
 
You can select the component and change the type from the Properties panel.  Here's more information about the component type:
https://www.altium.com/documentation/altium-designer/sch-prop-partpart-properties-ad#!properties
 
Was this article helpful?
0
0
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: