How to activate the Mixed Simulation tool in Altium Designer

Created: 25.03.2021 | Updated: 12.08.2021

How to activate the Mixed Simulation tool in Altium Designer

Starting in Version: 18.0
Up to Version: Current

Solution Details

To install the simulator plug-in do the following:

1- Check first if you have installed the system extension “Mixed Simulation”

2- If the “Mixed Simulation” extension has not yet been installed, please go to the “Purchased” tab and install it. In case the extension does not appear in the “Purchased” tab, check  Preferences ►  System ► Installation to make sure the “Global installation service” radio button is selected, and try again.

3- Once the “Mixed Simulation” extension is installed, when a schematic circuit is open within in a PCB project, the Design ► Simulate  Mixed Sim choice should be available.

Once you have installed the Mixed Simulation extension, you can find the installed libraries under the "C:\users\Public\Public Documents\Altium\<AD Version>\Library\Simulation" folder.  Descriptions of the library contents can be found here:

Keep in mind that to simulate an electronic design successfully, all circuit components must be ready for simulation, this means that each one must have a linked simulation model defined. Just as a symbol must be defined for a component, a simulation model for that component must be acquired and then linked, so that component is ready for simulation.

Here is more documentation that may be of interest:

These are old, but may help your overall understanding:
Defining & Running Circuit Simulation Analyses

Linking a Simulation Model to a Schematic Component

Videos SPICE Simulation training course

This link will bring up other videos available from the Altium Academy:
Was this article helpful?
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: