How to edit board shape

Created: 26.03.2021 | Updated: 12.08.2021

How to edit the board shape.

Starting in Version: 18.0
Up to Version: Current

Solution Details

Try these steps:
1. from top menu, View ► Board Planning Mode (or simply hit '1' for the keyboard shortcut)
2. from top menu, Design ► Edit Board Shape (or simply hit 'd' twice for the keyboard shortcut)
(see note below)

3. left-click and drag white edit handles, which appear as you hover over a board edge

Here's a link to the relevant section of documentation on Board Shape for editing the board shape:!edit-board-shape

Here's additional information that may be helpful:
Changing Board Sizes in Altium Designer:
Circuit Board Sizes and Shapes, How to Make a PCB:
Defining the PCB Shape:
Defining the Board Shape:

Note:  For AD21 and newer, If you don't see the Edit Board Shape under the Design menu, you many need to enable Legacy.PCB.RighidFlex  Preferences ► System ► General ► Advanced... button, search for "flex", then check the box in the Value column for Legacy.PCB.RighidFlex, close and restart Altium.
Was this article helpful?
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: