Layer Stack PDF Export Missing Bottom Surface Finish

Created: 25.03.2021 | Updated: 12.08.2021

You may come across some issue when placing, say, Layer Stack Table, in your *.PcbDoc for your documentation purpose, as it may not support all newly added elements, such as Surface Finish layer. Altium considers the legacy method to be somewhat obsolete and instead would like to direct you to Draftsman for this purpose.

Starting in Version: 20.0
Up to Version: Current

Solution Details

Going forward, use of Draftsman is our recommendation for all of your consolidated output drawing needs. As overwhelming or intimidating Draftsman may seem initially, it can be made simple as adding a stack layer on a Draftsman page and configuring it as a part of an outjob.

draftsman.png

Here are example steps you can follow:
1. add a new Draftsman document in your project and make it active in your workspace
2. from the menu, Place ► Layer Stack Legend, and place the layer stack on a page
3. save Draftsman document
4. in your Outjob, in Documentation Outputs, add Draftsman you've just created, and link it with PDF object in Output Containers

ref:
https://www.altium.com/documentation/altium-designer/draftsman-obj-layerstacklegendlayer-stack-legend-ad
Was this article helpful?
0
0
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: