Map MCAD Models to ECAD Components

Created: 13.07.2021 | Updated: 12.08.2021

This article covers how to make models placed on the MCAD side be recognizable on the ECAD side when using a Pro subscription plan.

Starting in Version: 20.1
Up to Version: Current

Solution Details

How to Map/Sync MCAD 3D Models to Components on ECAD

In order to make models placed on MCAD side being recognized on ECAD side:

  • Make sure a common parameter with the same name is defined for respective 3D model on the MCAD side and for the component footprint on ECAD side. For this purpose open the respective Altium Workspace inside web-browser and under the Admin ► Settings ► MCAD CoDesigner ► Enable check box “Recognize models placed in MCAD and use true electrical components in ECAD instead” ► Save the settings

 

  • Once the settings are saved, restart Altium Designer and MCAD Software (PTC Creo / Solid Works / Autodesk Inventor)
  • Now open MCAD Tool Software ► Open Altium CoDesigner panel ► Sign in and select your workspace
  • Create the Board Assembly or Pull Board from the Server 

 

 

 

 

 

  • Place the 3D model manually on the MCAD layout board 

 

 

 

  • Select the the 3D Model inside model tree >> Right Click >> Click on Parameters

 

 

 

 

  • Make sure to place this common parameter name with the type String and the common value used for same parameter on ECAD side
  • PUSH the changed MCAD Project to Altium Workspace using Altium CoDesigner Panel
  • Open Altium Designer and PULL the changes made on MCAD side
  • The MCAD model will automatically Sync to the Footprint with the right designator defined Altium Designer

 

Was this article helpful?
0
0
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: