MCAD Autodesk Vault is used with Autodesk Inventor

Created: 24.09.2021 | Updated: 24.09.2021

This article describes a short procedure to better enable this functionality

Starting in Version: 20.1
Up to Version: Current

Solution Details

1. Open Inventor’s ‘Project Editor‘ 
2. Select the ‘New..’ button and select Vault Project as a type 

Image 1.png

3. Specify your working folder, for exampl: D:\New Vault Project\ project name
4. After a project is created, in ‘Project\Vault Options\Virtual Folder' specify Virtual folder path to a folder created on Vault server (you may need to create this folder on vault server in advance)

Image 2.png

5. Restart (or start) Inventor 
6. In Inventor, open CoDesigner panel and select pull board from server 
7. Select your CoDesigner project 
8. Important - Save the project in the same folder as you set as the working folder for your vault project 

Image 3.png

9. Press Save
10. Check In the project from the Vault ribbon 
11. The Check-in dialog will appear 

Image 4.png
12. Press the ‘OK’ button
13. The project will be checked in
14. Now you may close the project or Inventor and open the project from the Vault server 
15. Open your project from the Vault server 

Image 5.png

16. Checkout the project

Image 6.png

17. Continue to work with it using CoDesigner

Was this article helpful?
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: