Unable to open *.DRL file in Altium

Created: 25.03.2021 | Updated: 12.08.2021

*.DRL generated by the CAM Editor is in ASCII Format and readable. The best practice is to always provide your Fabricator with the .TXT generated from the PCB Editor, and ignore the *.DRL generated by the PCB Editor.

Starting in Version: 18.0
Up to Version: Current

Solution Details

When creating NC Drill output from the Altium Designer PCB Editor, five files are created during this process. The following files are placed in a sub-folder (within the project folder) named 'Out'.
  1. .DRL (an older, legacy binary NC Drill Data, no longer used).
  2. .DRR (the ASCII NC Drill Report Data).
  3. .LDP (the ASCII Layer Pairs Export File).
  4. .TXT (the ASCII NC Drill file).
  5. StatusReport.TXT (the ASCII report file).
The .DRL is a binary file which can not be viewed in Camtastic, and is only provided for legacy purposes, the .TXT file is the ASCII NC Drill file you are looking for.
Was this article helpful?
0
0
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: