Importing a Mechanical Outline to PCB

Created: 25.03.2021 | Updated: 12.08.2021

Our mechanical engineer has created a PCB board outline complete with hole sizes & dimensions, and has sent it in 3D step file format. How to create a board shape from this file and other mechanical file types.

Starting in Version: 18.0
Up to Version: Current

Solution Details

The best method of defining the board shape from a mechanical drawing or a 3D model is to import the file and then redefine the board shape from that file. To do this:

For a 3D model
1. Place the 3D model on the PCB by: Place ► 3D Body. Then select the model.

2. Enter 3D mode, by going to View ► 3D Layout Mode

3. While in 3D Mode, go to Design ► Board Shape ► Define from 3D Body

4. Select the 3D model
5. Choose the Face of the model that you want to become the Board Shape

6. Set Options for the new board shape

For a mechanical drawing
1. Import the file, which needs to be in DXF or DWG format by going to File ► DXF/DWG

2. Select the mechanical drawing you want to import
3. Assign the scale to match the size/units of the drawing
4. Mapped the layers of the drawing to a mechanical layer on the PCBDoc
5. Select OK to import

6. With the outline imported, move it to where you want the board to be.
7. Select all of the lines that make up the outline, then go to: Design ► Board Shape ► Define from Selected Primitives

8. This should create the board shape based on the outline

Here is documentation on Defining the Board Shape:
Was this article helpful?
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: