Yellow line thru entire PCB window

Created: 15.09.2021 | Updated: 15.09.2021

If you have a yellow line through your PCB, it is probably a guide line (Snap Guide.) The color can be changed.

Starting in Version: 18.0
Up to Version: Current

Solution Details

To remove it, try this:
1.  Open the Properties panel through the Panels button located at the bottom right of the workspace.
2. Click outside of the board and the Properties panel should display the Board information.
3. Scroll down to the Guide Manager, and a single entry of a work guide will be visible.
4. Either disable it by unchecking the "Enabled" checkbox or delete it completely by using the trashcan icon.


Snap guide.png
 
Here's a link to documentation if you'd like to know more:
https://www.altium.com/documentation/altium-designer/pcb-grids-system-ad#snap-guides

 
Was this article helpful?
0
0
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: