Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
PCB_Dlg-ComponentRuleCheckComponent Rule Check_AD
Created: 八月 04, 2017 | Updated: 二月 22, 2018
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
您正在阅读的是 19.0. 版本。关于最新版本，请前往 PCB_Dlg-ComponentRuleCheck((Component Rule Check))_AD 阅读 21 版本
The Component Rule Check dialog
Summary
The Component Rule Check dialog allows you to specify rules to check a component that is currently active in the PCB library.
Access
The dialog is accessed from the PCB Library Editor by clicking Reports » Component Rule Check from the main menus.
Options/Controls
Duplicate
- Pads - enable this option to check for components with duplicate pads.
- Primitives - enable this option to check for components with duplicate primitives.
- Footprints - enable this option to check for components with duplicate footprints.
Constraints
- Missing Pad Names - enable this option to check for components with missing pad names.
- Mirrored Component - enable this option to check for components that are mirrored.
- Offset Component Reference - enable this option to check for components with the component reference offset.
- Shorted Copper - enable this option to check for components with shorted copper.
- Unconnected Copper - enable this option to check for components with unconnected copper.
- Check All Components - enable this option to check all components in the library.