Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
PCB_Dlg-FormBoardOutlineCreationBoard Outline Creation Successful_AD
Created: 七月 28, 2015 | Updated: 六月 16, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
您正在阅读的是 17.1. 版本。关于最新版本，请前往 PCB_Dlg-FormBoardOutlineCreation((Board Outline Creation Successful))_AD 阅读 21 版本
The Board Outline Creation Successful dialog.
Summary
When defining the board shape based on an existing 3D body, this dialog allows users to adjust the board outline's alignment. As well, DRC checking for the model part can be disabled and hidden.
Access
From 3D mode in the PCB Editor, select Design » Board Shape » Define from 3D body from the toolbar. After running the command, select a 3D body on the board to open the dialog.
Options/Controls
- Hide and disable DRC checking for the model part - This option is selected by default. De-select the option if you do not wish for DRC checking to be overridden.
- Modify model height - Select the option desired for determining how the 3D model is aligned with the board. The options are:
To align face with top PCB board surface,To align face with bottom PCB board surface, orDo not modify model position.
