Working with the Nets to Ignore Design Rule on a PCB in Altium Designer
Created: 十月 10, 2017 | Updated: 九月 26, 2019
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
您正在阅读的是 19.0. 版本。关于最新版本,请前往 Working with the Nets to Ignore Design Rule on a PCB in Altium Designer 阅读 21 版本
Rule category: Placement
Rule classification: Unary
Summary
This rule specifies which nets should be ignored.
Constraints
None, the rule applies to all nets targeted by the scope (Full Query).
How Duplicate Rule Contentions are Resolved
Contentions are not possible.
Rule Application
Not currently observed by the DRC tool.