Applied Parameters: Action = Previous
Summary
This feature enables you to make the previous available analysis chart the current chart in the Waveform Analysis window.
Access
This command is accessed from the SimData Editor by using the - (on the numeric keypad) keyboard shortcut.
Use
Depending on the analyses performed during the simulation, there will be a corresponding number of analyses tabs at the bottom of the Waveform Analysis window. Each tab contains a chart in which the results of the analysis can be seen graphically through the use of waveforms. Use this feature to make the previous chart in the series (to the left) the active one. Use the feature repeatedly to cycle backward (to the left) through all available analyses charts.