Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
WorkspaceManager_Dlg-Form_BuildMacroBuild Macro Path_AD
Created: 十一月 01, 2018 | Updated: 二月 06, 2019
| Applies to versions: 19.0, 19.1, 20.0, 20.1, 20.2 and 21
您正在阅读的是 19.0. 版本。关于最新版本，请前往 WorkspaceManager_Dlg-Form_BuildMacro((Build Macro Path))_AD 阅读 22 版本
The Build Macro Path dialog
Summary
The Build Macro Path dialog is used to create a file list entry using an assembled macro string.
Access
The dialog is accessed by clicking the Add button in the Copy Files List Setup dialog.
Options/Controls
- [Project] (first field) - click to access a sub-menu to create the desired path:
- [Project] - select to choose the Project itself; this will include only documents that have been added to the Altium Designer project.
- [Project Dir] - select to choose the local directory that contains the project.
- [Release Managed] - select to specify that the file source will be dynamically determined by the later project release process.
- Subfolder (center field) - click to access a sub-menu to create the desired path:
- Use base path – the file path is the source location, as defined in the initial option above.
- Choose subfolder – the file path is a nominated subdirectory within the Source path. Directly enter a subfolder path or browse to and select a subfolder using the
button.
- Filter (right field) - click to access a drop-down from where you can choose the desired file type extension or manually enter the desired extension.
- Include Subfolders (doesn't matter for [Project] macro) – enable for the mask filter to apply (and therefore include) files in any subfolders.
- Preserve Folder Structure – enable to ensure that the file source folder structure is retained when the Output generator is run.