WorkspaceManager_Dlg-ParameterEditorOptionsFormParameter Editor Options_AD
Created: 九月 27, 2017 | Updated: 九月 27, 2017
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21
您正在阅读的是 19.0. 版本。关于最新版本,请前往 WorkspaceManager_Dlg-ParameterEditorOptionsForm((Parameter Editor Options))_AD 阅读 22 版本
Summary
The Parameter Editor Options dialog allows you to define the type of information that will display in the Parameter Table Editor.
Access
The dialog is accessed from the schematic editor by clicking Tools » Parameter Manager from the main menus.
Options/Controls
- Include Parameters Owned By - use the checkboxes to display parameters owned by:
- Parts
- Nets (Parameters Sets)
- Sheet Symbols
- Pins
- Models
- Ports
- Documents
- That Meet the Following Criteria - select a scope of criteria from the drop down for objects to be included:
- All Objects
- Objects with existing parameters
- Objects with existing used parameters
- Other Options
- Exclude System Parameters - enable this option to exclude all system parameters.
- Selected Objects Only - enable this option to include only selected objects.