Applied Parameters: None
Summary
This command is used to execute the current function after all required objects involved in the function have been selected.
Access
With a command running and the required objects selected, this command can be accessed from the CAMtastic Editor by:
- Clicking the
button, on the Miscellaneous Tools drop-down (
) of the Utilities toolbar.
- Using the Shift+F9 keyboard shortcut.
While performing most interactive commands, right-clicking also executes the function - at the point after selection of objects on which to operate. The prompts in the Status Bar will indicate when a right-click can be used in this way.
Use
First, ensure that all objects required to be included in the current function (e.g. move, rotate, etc), are selected in the main design workspace.
After launching the command, the function will be executed.
Tips
- This command is only available when performing actions requiring object selection prior to execution.
Altium Designer Documentation
...
Command Reference
CAMtastic Commands