Design View

Created: March 13, 2018 | Updated: July 13, 2024 | Applies to versions: 18.0, 18.1, 19.0 and 19.1

Now reading version 19.0. For the latest, read: Design View for version 21

Place a Design View to show a specific area of the board. This example has been scaled to 200%.

Summary

The PCB Design View object is a graphic snapshot of any rectangular shaped region of the current board or another board. It can be placed anywhere in the workspace and scaled to any size.

Availability

A Design View can be placed in the PCB Editor in one of the following ways:

Click Place » Design View from the main menus.
Right-click in the workspace then choose Place » Design View from the context menu.

Placement

After launching the command, a design view will appear attached to the cursor. Position the design view in a suitable location then click or press Enter to place it.

Additional actions that can be performed during placement while the design view is still floating on the cursor and before the design view is anchored are:

Press the Tab key to pause the placement to access the Design View mode of the Properties panel from where its properties can be changed on-the-fly. Click the workspace pause button overlay ( ) to resume placement.
Press the Alt key to constrain the direction of movement to the horizontal or vertical axis, depending on the initial direction of movement.

While attributes can be modified during placement (Tab to access the Properties panel), keep in mind that these will become the default settings for further placement unless the Permanent option on the PCB Editor – Defaults page of the Preferences dialog is enabled. When this option is enabled, changes made will affect only the object being placed and subsequent objects placed during the same placement session.

After placement of the design view, you can define the display of desired layers by performing the following steps:

With the Design View selected in the workspace, open the Properties panel by double-clicking or right-clicking then choosing Properties from the context menu.
Use the Define button in the Properties panel to interactively define the area of interest.
In the Layers section of the Properties panel, click (toggle) the icon to enable the display of the desired layers. When enabled in the Properties panel, the desired layer(s) will display the icon.

Including a Design View in Printed or PDF Output

Design Views are included in printed and PDF output. The Design View retains its own layer visibility settings in the output allowing it to present as required in the printed/PDF output. Note that the primitives on layers used in the Design View continue to obey the display settings defined in the Layer Properties dialog for that layer in the PCB Printout Properties settings defined for that output. For example, if the Top Overlay is displayed in the Design View and the Top Overlay is configured to display tracks in Draft mode for that output in the Output Job, then the Top Overlay tracks in the Design View will also present in Draft mode.

Note that Design Views are not included in Gerber or ODB++ output.

Graphical Editing

Once a Design View has been placed in the workspace, you can interactively adjust the position, scale, size and focus of the View.

Change the position – Click+Drag the Design View object to a new location on the PCB workspace.
Adjusting the Scale – click once to select the Design View then Click+Drag on a corner handle to scale the Design View up (drag out) or down (drag in).
Adjusting the View Size – click once to select the Design View then Ctrl+Click+Drag on a corner handle to resize the Design View.
Changing the Focus – Ctrl+Click+Drag anywhere within the Design View to slide the currently viewed area around within the Design View window.

Ctrl+Click+Drag to slide and adjust the area currently being viewed in the Design View.

If attempting to graphically modify an object that has its Locked property enabled, a dialog will appear asking for confirmation to proceed with the edit. If the Protect Locked Objects option is enabled on the PCB Editor – General page of the Preferences dialog and the Locked option for that design object is enabled as well, then that object cannot be selected or graphically edited. Click the locked object to select it then disable the Locked property in the List panel or disable the Protect Locked Objects option to graphically edit the object.

Non-Graphical Editing

The following methods of non-graphical editing are available:

Editing Via the Properties Panel

Properties page: Design View Properties

This method of editing uses the associated Properties panel mode to modify the properties of a design view object.

During placement, the panel can be accessed by pressing the Tab key.

To access the properties of a placed design view:

Double-click anywhere on the design view object.
Right-click on the design view then select Properties from the context menu.
If the Properties panel is already active, click anywhere on the design view object to select it.

Press Ctrl+Q to toggle the units of measurement currently used in the panel between metric (mm) and imperial (mil). This only affects the display of measurements in the panel; it does not change the measurement unit specified for the board. This is configured in the Units setting in the Properties panel when there are no objects selected in the editing workspace.

Editing via a List Panel

Panel pages: PCB List, PCBLIB List, PCB Filter

A List panel allows you to display design objects from one or more documents in tabular format, enabling quick inspection and modification of object attributes. Used in conjunction with appropriate filtering - by using the PCB Filter panel or the Find Similar Objects dialog - it enables the display of just those objects falling under the scope of the active filter – allowing you to target and edit multiple design objects with greater accuracy and efficiency.

Printer-friendly version

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.