Parent page: Schematic Commands
The following pre-packaged resource, derived from this base command, is available:
Place Part
Applied Parameters: UseBrowser=True | ID=LibraryBrowser
Summary
This command is used to provide quick access to the Components panel from where you can browse and place a component onto the current document from any of the available libraries. The Components panel offers advanced search functions and the ability to drag and drop a component from the panel directly onto the active schematic document.
For detailed information about this object type, see
Part.
Access
This command can be accessed from the Schematic Editor by:
- Choosing the Place » Part command from the main menus.
- Locating and using the Part command (
) on the Active Bar.
- Clicking the button on the Wiring toolbar.
- Right-clicking in the workspace then choosing the Place » Part command from the context menu.
Use
After launching the command, the Components panel will open.
Tips
- If the panel is part of a group of panels, using this command will make it the active panel in the group - bringing it to the front in docked or floating modes, and popping it out in pop-out mode.
- The panel can also be toggled with respect to its visibility using the View » Panels » Components command or by clicking the Panels button (available at the bottom right of the main editor) and choosing the Components menu entry.
Altium Designer Documentation
...
Command Reference
Sch Commands