Image Properties
This document is no longer available beyond version 21. Information can now be found here: Image Properties for version 24
Parent page: Image
Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
-
Pre-placement settings – most Image object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic – Defaults page of the Preferences dialog (accessed from the
button at the top-right of the design space). Select the object in the Primitive List to reveal its options on the right.
-
Post-placement settings – all Image object properties are available for editing in the Images dialog and the Properties panel when a placed Image/Graphic is selected in the design space.
Location (Properties panel only)
- (X/Y)
- X (first field) – the current X (horizontal) coordinate of the reference point of the object, relative to the current design space origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- Y (second field) – the current Y (vertical) coordinate of the reference point of the object, relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
Properties
- File Name (Properties panel only) – the name of the graphic file. Click
to open a dialog in which you can search for and select an image. -
Embedded – click to embed the graphic.
- Width – the width of the graphic.
- Height – the height of the graphic.
- X:Y Ratio 1:1 – enable to make the X and Y ratio 1 to 1.
- Border – enable the box to show a border. Use the drop-down to select the default from the available choices.