Differences Setup
Created: April 20, 2018 | Updated: April 21, 2018
| Applies to versions: 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21
Now reading version 19.0. For the latest, read: Differences Setup for version 22
Summary
The Differences Setup dialog allows you to configure the settings for findings in a Differences Report.
Access
The dialog is accessed in one of the following ways:
- In the Project Options - Default Prints dialog, select Differences Report in the Validation Outputs section, then click Configure.
- In an OutJob, right-click [Add New Validation Output] under Validation Ouputs then choose Differences Report from the sub-menu then select the desired document.
- In an OutJob, double-click a Differences Report entry under Validation Ouputs.
Options/Controls
- Comparison Type Description/Mode - this is a list of all differences that are available to be checked and reported. Click the entry in the Mode column to choose from the following comparison types:
- Ignore Differences
- Find Differences
- Set To Project Default - click to revert to the default settings.