Applied Parameters: ObjectKind=Document
Summary
This command is used to run an electrical rules check (ERC) on the active Multi-board Schematic document, checking for violations concerning the connections between the modules on the sheet, as well as problems associated with mated parts.
Access
This command is accessed from the Multi-board Schematic Editor by choosing the Design ยป Run ERC command, from the main menus.
Use
After launching the command, the ERC will be run. Any issues will be flagged as entries in the Messages panel.
Tips
- The Compiler uses the options defined on the Error Reporting tab of the Options for Project dialog, when checking for violations.
