Altium Concord Pro on A365 - Part Source Configuration

 

Each Workspace has its own dedicated Part Catalog. This is a managed part catalog database, dedicated to the management and tracking of manufacturer parts and their associated supplier parts. The catalog is installed as a service (Part Catalog Service), provided through the Altium 365 platform, and works only with the Workspace.

The Part Catalog stores items representative of actual Manufacturer Parts, along with one or more items representative of Supplier Parts - the incarnations of those Manufacturer Parts, as sold by the Suppliers/Vendors. Each Supplier Part is a reference to an item in the aggregate parts database of the Altium Parts Provider (which itself interfaces to, and gathers the parts from, enabled Suppliers).

Which Suppliers are actually used - a list of Approved Suppliers - is managed by the Workspace, through the Part Providers page of its browser interface. This facilitates centralized supply chain management, with designers across the entire organization using the same approved list of Suppliers, with which to source supply chain intelligence for parts used in their designs.

This document concerns centralized configuration of Suppliers as part of a Workspace. When using a Workspace, you have the ability to create and use managed components, with supply-chain information determined through Part Choices, and sourced through the Workspace's Part Catalog. If you don't have a Workspace, and are therefore using component management methodologies that utilize SchLib, DbLib, or SVNDbLib as their 'backbone' for component storage, you are still able to link your components to supplier data, with configuration performed solely as part of your Altium Designer preferences. For more information, see Linking to Supplier Data.

Accessing the Altium Parts Provider

A single Part Source is available in the Workspace - Altium Parts Provider. This is an aggregate supplier data service that provides access to live component information from a comprehensive range of parts suppliers. It is accessed through the Part Providers page (Admin - Part Providers).

Access to, and management of the Altium Parts Provider Part Source for a Workspace can only be performed by an administrator of that Workspace.

Enabling required Suppliers and determining Location/Currency ranges for the Altium Parts Provider. This is the available Part Source for the Workspace. These settings will apply to Altium Designer when connected to the Workspace.Enabling required Suppliers and determining Location/Currency ranges for the Altium Parts Provider. This is the available Part Source for the Workspace. These settings will apply to Altium Designer when connected to the Workspace.

The Altium Parts Provider settings that are established in the Workspace will override those in Altium Designer (through the installed Altium Parts Provider extension) when a user connects to the Workspace.

The actual supply chain intelligence - comprising Manufacturer (and part number), Supplier (and part number), Description, Pricing and Availability - is sourced from the Workspace's Part Catalog and the Altium Parts Provider.

Use the associated icon in the Enabled column to toggle the state of the part source between enabled () and disabled (). A window will appear asking for confirmation - click  or  respectively. Note that the Altium Parts Provider can be disabled, but cannot be removed.

Configuring the Altium Parts Provider

To configure the available suppliers for the Altium Parts Provider source, either click on its name, or its associated edit control (). The detailed configuration page will be presented:

The configuration page for the Altium Parts Provider part source.The configuration page for the Altium Parts Provider part source.

Options to configure include the following:

  • Locations - enable which geographical regions the parts service will collate parts data from. While many suppliers are multi-regional, if a part is uniquely available in a specific location, it will only be listed if that region is enabled. Click the  button to access the Locations Settings window, from where you can specify which locations are to be used (enabled) and also change priority, so that search results from preferred locations are returned first. With any changes made, click the  button.
Quickly toggle all locations between enabled () and disabled () using the control to the left of the Location header.

  • Currencies - enable which international currencies will be available for selection when searching for parts and examining results. Click the  button to access the Currencies Settings window, from where you can specify which currencies are to be used (enabled) and also change priority. With any changes made, click the  button.
Quickly toggle all currencies between enabled () and disabled () using the control to the left of the Currency header.

  • Suppliers - enable which Suppliers to include when performing a supplier data search. Only part results from those Suppliers will be returned.  By including more Suppliers for use with the feature, you are able to compare and shop for the best deals on the components required by your design.

Working with the Suppliers grid:

  • Suppliers can be filtered using the field at the top of the list, allowing you to quickly browse the large range of available Suppliers more easily.
  • Use the associated icon in the Enabled column to toggle the state of the Supplier between enabled () and disabled ().
  • Use the icon to the right of the Enabled column header to quickly enable or disable all Suppliers.
  • Use the Show Verified only option to present only those Suppliers that are Verified. This means that a Supplier is a partner of the aggregator service that underlies the Altium Parts Provider, has proven to own its own stock, and its data feeds are real (considered trustworthy).
  • Use the Show Enabled only option to present only those Suppliers that are currently enabled ().

A Word About...Supplier Preferences

Related page: Linking to Supplier Data

The Data Management - Parts Providers page of the Preferences dialog is command-central for configuring which Suppliers will be available when searching for parts data, along with other options relating to linking to Supplier data.

Configure options relating to the feature to link to Supplier data, as part of your Altium Designer preferences.Configure options relating to the feature to link to Supplier data, as part of your Altium Designer preferences.

The appearance and functionality of the page depends on whether you are signed into a Workspace or not:

  • Not signed into a Workspace - the Altium Parts Options section is fully editable. Use this to configure the aggregate supplier data service to suit your needs. Note that locations and currencies can be reordered by dragging and dropping, and the supplier listing can be filtered using the field immediately above the list (and below the Supplier column header).

Options for configuring Suppliers - when you are not signed into a Workspace.Options for configuring Suppliers - when you are not signed into a Workspace.

  • Signed into a Workspace - while you remain signed into a Workspace from Altium Designer, the Altium Parts Options region becomes read-only and adopts those settings defined for the Workspace (specifically, the Altium Parts Provider part source). Text will appear above the section to remind you of this. Refer back to the section Configuring the Altium Parts Provider for more information.

While signed in to your Workspace, the Altium Parts Options section will simply be a read-only reflection of what has been centrally configured in that Workspace.While signed in to your Workspace, the Altium Parts Options section will simply be a read-only reflection of what has been centrally configured in that Workspace.

When you make any changes to the Altium Parts Provider part source through the Workspace, you will need to restart Altium Designer to refresh and see those changes on the Data Management - Part Providers page.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Content