How do I reset the Altium Designer configuration to the installation defaults?

Modified by Admin on Jun 4, 2021

Reset the configuration of Altium Designer.

Applicable Versions: All Versions

Solution Details

The issue you are experiencing could be caused by a minor corruption of the preferences.  It is recommended that you save your preferences and attempt a reset to see if this resolves your issue.

Removing your preferences, which also clears Altium cache and some registry entries, will leave your Altium software in a freshly installed state, so if you connect to a private license or managed content server, please record that information before starting this process.

If you'd like to follow along with screen shots, see the choice for "Remove Preferences" while following the steps in this documentation:
https://www.altium.com/documentation/altium-designer/altium-designer-system-installation-licensing-management#!uninstalling

1. Back up the Altium Designer preferences:
-Open the Preferences Panel. 
-Press the Save... button, at the bottom left of the dialog box. 
-Choose a location & file name for the backup file, and save it. 
(If required, these can be restored later by using the Load... button, found in the same dialog.)
*** If you connect to a private license or managed content server, please record that information before continuing.
(This information can be found by clicking on the Setup private license server control near the bottom of the License Management page) ***
*** If you are using the NEXUS client, record your server information so you can log in again when you re-start. ***
-Close Altium Designer 

2. Remove the Preferences:
- Start Menu ► Control Panel ► Programs and Features 
-Select the version of Altium Designer from which you wish to remove the preferences in the list box 
-Select ‘Uninstall’ to start the Altium Uninstaller dialog 
-Select 'Remove Preferences' from the Uninstaller dialog <ok>, <finish>. 
-Close the un-installer 




3. Run Altium Designer and be sure not to import your preferences if prompted at startup. Altium will be in a state of starting up for the first time, so you will need to perform your licensing steps again. If this does not resolve your issue, you can re-load your preferences later from the file you saved in the first step.

If it does resolve your issue, you can manually set your preferences over again.  If this sounds onerous, you could experiment with reloading individual sections of your preferences: 
From the Preferences panel, click the Load… button, at the bottom of the dialog box, choose the file, expand "Show options page list" if necessary, to access and select /de-select the sections desired and then click OK.

Was this article helpful?
0
0
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
You are reporting an issue with the following selected text
and/or image within the active document:
ALTIUM DESIGNER FREE TRIAL
Altium Designer Free Trial
Let’s get started. First off, are you or your organization already using Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

In that case, why do you need an evaluation license?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You actually don’t need an evaluation license for that.

Click the button below to download the latest Altium Designer installer.

Download Altium Designer Installer

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Please fill out the form below to get a quote for a new seat of Altium Designer.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

If you are on Altium Subscription, you don’t need an evaluation license.

If you are not an active Altium Subscription member, please fill out the form below to get your free trial.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Why are you looking to evaluate Altium Designer?

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

You came to the right place! Please fill out the form below to get your free trial started.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Great News!

Valid students can get their very own 6-month Altium Designer Student License for FREE! Just fill out the form below to request your Student License today.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.

That’s great! Making things is awesome. We have the perfect program for you.

Upverter is a free community-driven platform designed specifically to meet the needs of makers like you.

Click here to give it a try!

If would like to speak with a representative, please contact your local Altium office.
Copyright © 2019 Altium Limited

Got it. You can download a free Altium Designer Viewer license which is valid for a 6 months.

Please fill out the form below to request one.

By clicking “Get Your Free Trial”, you are agreeing to our Privacy Policy.
You may receive communications from Altium and can change your notification preferences at any time.