KB: Release not available

Created: September 18, 2021 | Updated: August 28, 2023

"Release not available: Project is not registerd [sic] in PLM" may show up when using Project Releaser, if you have a PLM extension installed.

Starting in Version: 18.0
Up to Version: Current

Solution Details

If you get this error:

Release not available.png

This issue typically stems from the Aras PLM extension found under: Extensions and Updates ► Installed.
 
If you are not using Altium with Aras PLM, uninstall the Aras PLM extension(s).  Here's documentation that covers program extension installation and removal (uninstalling is at the bottom):
https://www.altium.com/documentation/altium-designer/extending-altium-designer


rtaImage.jpg
 
You should re-start Altium after clicking on the trash can icon which removes the extension. 
If you are using PLM, you may need to go to Project ► PLM ► click enabled to remove the checkbox.


PLM2.png
 
Was this article helpful?
0
0
Found an issue with this document? Highlight the area, then use Ctrl+Enter to report it.

Contact Us

Contact our corporate or local offices directly.

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
You are reporting an issue with the following selected text
and/or image within the active document: