KB: Drill Table Slot Counts Appear Incorrect

Altium Designer Altium Designer
In some cases, the drill table may appear to report more slotted holes than are present in the PCB design. This behavior can occur when working with a drill table in Draftsman and is related to how holes are grouped within the drill drawing. The reported slot counts may seem incorrect because multiple hole types are being combined into the same grouping rather than displayed as separate entries. Reviewing the drill table configuration and hole grouping settings allows the different hole types to be distinguished correctly.

Solution Details

Drill Table Shows Unexpected Slot Counts

A project processed through Project Releases may show a higher number of slotted holes in the drill table than are currently visible in the PCB file. The issue is typically limited to slotted hole entries, while round hole counts appear to match the PCB design.

Grouped Hole Types Affect Reported Counts

This behavior occurs in Draftsman when hole types are grouped within the drill drawing. Because the holes are grouped together, the drill table does not separate all hole types into individual entries, which can make it appear that more slots exist than are actually present in the PCB design.

Review Hole Type Classification

  • Enable display of the hole type information in the drill drawing.
  • Review the drill table entries to determine whether multiple hole types have been grouped together.
  • Compare the displayed hole types against the PCB design to verify the actual slot and round hole counts.

Enable Hole Type Visibility in Draftsman

  1. Open the affected drawing in Draftsman.
  2. Select the Drill Drawing View.
  3. Open the Drill Properties panel.
  4. Enable the visibility option for Hole Type.
  5. Review the drill table and identify any grouped entries.
  6. Use the displayed hole type information to determine which holes are being grouped together and validate the reported slot counts.

References

問題が見つかった場合、文字/画像を選択し、Ctrl + Enter キーを押してフィードバックをお送りください。