Generating Fabrication Data from a PCB in CircuitMaker

The Fabrication region includes commands that allow you to review PDF outputs, which you can then print. The commands can be accessed from the PCB editor in the Outputs | Fabrication region.

Each command is described in detail below.

Printing

This command includes a sub-menu of commands that allow you to create various drawings, prints and PDFs. Each sub-menu command is described below.

Composite Drill Guide

Use to create a predefined composite drill drawing for the source PCB document. The Preview dialog opens in which you can configure and print the drawing(s).

Drill Drawings

Use to create a predefined set of drill drawings and guides for the source PCB document. The Preview dialog opens in which you can configure and print the drawing(s).

Final

Use to create a complete, predefined final artwork print-set for the source PCB document. The Preview dialog opens in which you can configure and print the print-set.

Mask Set

Use to create predefined solder/paste mask drawings for the source PCB document. The Preview dialog opens in which you can configure and print the mask set.

Power-Plane Set

Use to create predefined power-plane drawings for the source PCB document. The Preview dialog opens in which you can configure and print the drawing(s).