MCAD CoDesigner panel is not visible in Creo

Created: 24.09.2021 | Updated: 01.12.2021

There are different resolutions based on whether the add-in is loaded, failed to initialize, or is hidden in the User Interface.

Starting in Version: 20.1
Up to Version: Current

Solution Details

When add-in is not loaded:
To resolve this issue you may need to reinstall Creo CoDesigner add-in. If reinstallation does
not help then try the following steps:
 
1. In Creo, open Auxiliary Applications Manager


01.PNG
 
 
 2. In Auxiliary applications manager, press ‘Register...’ button and select
Altium.dat’ file from the folder that corresponds to your Creo version

 02.PNG

3. After that, press the ‘Start’ button in the Auxiliary applications manager to get
CoDesigner loaded.
 
If you see an error message like the this:


03.PNG
 
It means that add-in is actually loaded and the reason why CoDesigner panel is missing is
different (see below).
 
When add-in failed to initialize:
If add-in has failed to initialize you may just need to reinstall add-in, also you may need to inspect
the list of other add-ins installed in Creo and disable other add-ins.
 
When add-in panel is hidden in the UI:
Creo options allow the removal of the CoDesigner palette, This can be managed in
Options ► Customize ► Ribbon


04.PNG
If you can't find the CoDesigner palette here, try to use ‘Reset’ button in this dialog to reset the
UI and press ‘OK’ then restart Creo to make sure all the changes are applied.

 
Was this article helpful?
0
0
Обнаружили проблему в этом документе? Выделите область и нажмите Ctrl+Enter, чтобы оповестить нас.

Связаться с нами

Связаться с нашими Представительствами напрямую

We're sorry to hear the article wasn't helpful to you.
Could you take a moment to tell us why?
200 characters remaining
Вы сообщаете о проблеме, связанной со следующим выделенным текстом
и/или изображением в активном документе: