Defining Multi-board Schematic Object Default Preferences for Altium NEXUS

Parent page: Accessing, Defining & Managing System Preferences

The Multi-board Schematic - Defaults page of the Preferences dialog showing the Cable Connection primitive as an example.

Summary

The Multi-board Schematic – Defaults page of the Preferences dialog provides numerous controls relating to the default settings within the multi-board schematic design space.

Access

The Multi-board Schematic – Defaults page is accessed by clicking Defaults under the Multi-board Schematic folder in the main Preferences dialog (accessed by clicking the  button in the top right corner of the design space).

Options/Controls

• Primitives - use this field to filter the presented listing of primitives. Choose from: All, Geometry, Connection, and Module.
• Primitive List - a list of primitives that can be used in the multi-board schematic editor (filtered in accordance with the chosen entry for the Primitives field above). Click on the listed Primitives to change the available default values as described.

To view and edit the settings and options for each primitive, click on the desired entry in the Primitive List. Information for each primitive can be found at the following links: 

• Module
• Entry
• Direct Connection
• Wire Connection
• Cable Connection
• Harness Connection
• Line
• Circle
• Arc
• Region
• Rectangle
• Picture
• Text